Cerakote Benelli Sand H-143 Ceramic Coating 1PT/Bottle

Cerakote Benelli Sand H-143 is a warm sand shade in the Cerakote® H-Series of oven-cured ceramic-polymer coatings from NIC Industries, USA, developed specifically for Benelli firearm finishes with a flat (matte) appearance. Based on a proprietary ceramic-polymer composite technology, the coating achieves a typical thickness of 1.0–2.0 mils, has a specific gravity of approximately 1.41, and measures about 5 gloss units at 60°. It requires use with a dedicated catalyst and must be filtered through a 150-mesh screen (SE-276). The recommended cure schedule is 2 hours at 180–250°F or 1 hour at 300°F, within a temperature range of 250–300°F (approximately 120–150°C). The cured coating offers a balance of flexibility and abrasion resistance, along with good resistance to most solvents and chemicals.

Cerakote H-143 Benelli Sand ceramic coating features a matte finish in light sand beige with soft, uniform tone, delicate texture and good visual stability.

Cerakote H-143 Benelli Sand ceramic coating delivers excellent adhesion, firmly bonding with a variety of metal substrates and resisting delamination.

Cerakote H-143 Benelli Sand ceramic coating has high surface hardness, scratch and abrasion resistance to withstand daily friction and minor impact damage.

Cerakote H-143 Benelli Sand ceramic coating offers outstanding salt spray corrosion resistance, effectively protecting metal substrates in humid environments.

Cerakote H-143 Benelli Sand ceramic coating resists a wide range of solvents and industrial cleaners, remaining intact upon contact with oils and chemicals.

Cerakote H-143 Benelli Sand ceramic coating possesses good flexibility and will not crack when the workpiece undergoes moderate bending.

Cerakote H-143 Benelli Sand ceramic coating features excellent UV weather resistance and resists fading and chalking during long-term outdoor exposure.

Cerakote H-143 Benelli Sand ceramic coating is formulated for thin-film application. Its low coating thickness will not alter the original dimensional tolerances of workpieces.

Cerakote H-143 Benelli Sand ceramic coating is suitable for surface decoration and protective coating of automotive trim parts, motorcycle hardware components, outdoor metal structures, precision mechanical parts, tool hardware, equipment housings and consumer metal products.