Skip to main content
中文

Whitmore WBL-52 Dry Film Lubricant 40LB/Drum

Whitmore WBL-52 Dry Film Lubricant 40LB/Drum

Overview

Whitmore WBL-52 is a water-based dry film lubricant with super-fine synthetic graphite that withstands continuous temperatures to 1065°C, dilutes 10:1 with water and goes on by spray, brush or dip. Whitmore WBL-52 is nonflammable and solvent-free for cement kiln rollers, forging, aluminum die casting, wire drawing and high-temperature chains.
Pack sizes
40LBOn request
Application areas
Cement & Mining Low Toxicity
Get a quote TDS SDS/MSDS

Description

Whitmore WBL-52 is a water-based gel dry film lubricant with super-fine synthetic graphite (1-2 micron particles) held in suspension. When sprayed, brushed or dipped onto metal, the water evaporates and leaves a dense, tenacious dry graphite film that lubricates where high temperatures rule out conventional oil- or solvent-based products; with regular replenishment it withstands continuous temperatures up to 1950°F (1065°C). The concentrate is ideally diluted 10:1 with water, shows excellent wetting on metal, stays stable with minimal separation over long storage, and is nonflammable and non-combustible, avoiding the carbon deposits typical of oil-based products. Typical applications include cement kiln support rollers, stop blocks and slipper pads, non-ferrous metal forging, aluminum die casting and extrusion, wire drawing, high-temperature chains, stop-off and anti-weld coating and glass-forming tools. Apply with a hand-held pump-up sprayer using a long nozzle extension; do not allow to freeze.

Applications

  • Water-based dry film: super-fine 1-2 micron synthetic graphite leaves a dry lubricating film after water evaporates.

  • Extreme temperature: up to 1950°F (1065°C) continuous with regular replenishment.

  • Economical dilution: concentrate dilutes 10:1 with water and stays stable with minimal separation in storage.

  • Excellent wetting: adheres well to metal surfaces; can be sprayed, brushed or dipped.

  • Nonflammable: non-combustible and solvent-free, with no carbon deposits like oil-based products.

  • High-temperature applications: cement kiln support rollers, stop blocks, slipper pads, forging, aluminum die casting, wire drawing and glass tooling.

  • Handling note: apply with a pump-up sprayer and long nozzle; do not allow the product to freeze.

Product video

Product photos

Whitmore WBL-52 Dry Film Lubricant 40LB/Drum
Whitmore WBL-52 Dry Film Lubricant 40LB/Drum
Whitmore WBL-52 Dry Film Lubricant 40LB/Drum
Whitmore WBL-52 Dry Film Lubricant 40LB/Drum

Technical data

Technical data for this item is being compiled. Use “Request TDS” on the right for the full datasheet.

Pack sizes

Pack sizeContainer MOQAvailability
40LB On request

Application areas

More from this brand

More in this family

View all products from this brand